 |
EZ-Slide Bunk Glides
The new R&D EZ-Slide Bunk Glides are
designed to mount directly on the top side
of the trailer bunks creating a new low
friction slippery surface that allows the
watercraft to glide on or off the trailer,
making loading and unloading a personal
watercraft easy. Designed and molded from
high density urethane to significantly
support the hull surface for proper
trailering. The EZ-Slides are black in color
and come in a six piece set complete with
stainless steel button head mounting
hardware. One set needed per watercraft.
Order a set today and take the work out of
loading and unloading your watercraft.
Pt. # 001-00122
 |
|
 |
 |
SXR
800 Aquavein Stealth Pro Series - Now
Available
R&D has once again raised the bar of intake
grate performance. The new Stealth Series
Aquavein for the Kawasaki SXR 800 introduces
a new “industry first” revolutionary
three-wing design with a deeper center rear
pickup (full 12mm) and a new 20% wider
design to the rear side pickup’s. The new
R&D SXR 800 Stealth Aquavein delivers the
ultimate in performance with maximum hookup,
unmatched high speed stability, increased
cornering (leanin angle) capabilities, and
improved off-throttle braking performance.
R&D’s dual patented Aquavein technology was
used by all top race teams at the 2004 world
finals, and has dominated Pro and expert
Stand-up Competition for over a decade.
Order your Aquavein today and experience
Championship Performance. Nothing
outperforms an Aquavein. (R&D SXR Aquavein
is designed to be used with R&D SXR Ride
Plate)
Pt. # 111-80001
|
|
|
|
 |
SXR
800 Pro Series Ride Plate - Now
Available
We’ve taken our popular SXR 800 Ride Plate
and made it even better. The new R&D SXR 800
Pro Series Ride Plate has a lower plaining
surface, improved rear contour shape and an
optional bottom hole pattern that can be
utilized along with the existing rectangular
slot for added traction. This plate delivers
the best handling performance on the market,
with reduced porpoising, increased high
speed stability, improved traction and
cornering. It also integrates with
aftermarket pumps and drop nozzle systems.
(R&D SXR 800 Ride Plates are designed to
mate to R&D SXR 800 Aquavein Grates.)
Pt. # 121-80001 Retail $169.99
|
|
|
|
 |
SXR
800 Afterburner Pump Core Sleeve/Adjustable
Cone Kit
- Now Available
Transform the O.E.M Kawasaki SXR 800 Pump
into a high performing large hub, high
pressure axial flow design inexpensively
with the exclusive R&D Large Hub Afterburner
Pump Core sleeve and adjustable Anti-cavitation
Pump Cone Kit design . Experience much
better hole shots and 1 mph plus gains in
top speed performance with the added pump
efficiency and thrust. The Afterburner Pump
Core will drastically increase pump hook up
and rear end traction. The innovative and
superior R&D design allows impeller changes
to be made easily in minutes. The
Afterburner Anti-cavitation rear cone length
is tunable with kit supplied spacer shims
which allows custom peak RPM tuning for any
brand or pitch of impeller with a 73-75mm
hub. Better holeshots, hook up, top speed,
tuneability, and R&D quality at a very
reasonable price! Dollar for dollar the R&D
Afterburner Pump Core Kits performance
cannot be beat. The R&D Afterburner Pump
Core Kit will install into all 1992-2006
Kawasaki 750-800 stand up model pump
housings.
Pt. # 161-00801
|
|
|
|
 |
Ultra
250 Driveshaft Shim Kit -
Now Available
The R&D driveshaft shims install into the
prop snout and remove the unwanted play or
float the driveshaft has in the prop/pump
assembly. Properly shimming the driveshaft
will keep the driveshaft couplers fully
engaged. Fully engaged couplers eliminates
premature rubber dampner wear and failure.
Pt. # 161-00810
|
|
|
|
 |
SXR
800 Afterburner Tunable Pump Cone for
Skat-Trac Pumps
- Now Available
The new R&D Afterburner Pump Cone for all
Skat-Trac SXR 800 Pumps allows for custom
peak rpm tuning. With the kit supplied
spacer shims you can now fine tune the pump
for maximum RPM and speed!
Pt. # 161-00804
|
|
|
|
 |
SXR
800
Tru-Align Driveline Couplers
- Now Available
The new billet aluminum design delivers
maximum strength and balance for those high
horsepowered Kawasaki's. These couplers allow
for precision engine alignment which
drastically reduces vibration. Accepts OEM
rubber biscuit.
Pt. # 611-75002
|
|
|
|
 |
SXR
800 Pro Super Stock Pump Cone
- Now Available
The R&D Pro Super Stock Pump Cone is
designed specifically for Super Stock SXR
800's. The cone mounts directly to the R&D
Afterburner Pump Core Sleeve and comes
complete with two tuning shims and hardware.
Pt. # 161-00803
|
|
|
|
 |
SXR
800 Dominator M-16 Sidedraft Manifold Kit
- Now Available
A new and industry first for the Kawasaki
SXR 800 is the innovative R&D Dominator M-16
Sidedraft Intake Manifold System! Four to
six peak horsepower gains on limited’s and
eight to ten peak horsepower gains on
superstocks! “An incredible low end and mid
range power gain” quoted 10 time World
Champion Jammin’ Jeff Jacobs, and “The most
bottom and mid range power gain I’ve ever
felt from a carburetion setup” quoted Rob
Flores during pre-reproduction testing! The
technology in the new Dominator Manifold and
M-16 Reed System has powered factory YAMAHA
and KAWASAKI race teams to every Pro 1200 cc
World title since 2000, and has won 2 Pro
800 cc World titles. After three years of
intense testing on the Kawasaki SXR 800, R&D
has mastered the technology for a stand up
model! The R&D Dominator M-16 Intake System
will guarantee blistering acceleration and
mid range performance, and is a must have
accessory for the 2005 World Finals! Very
easy to install, easy to tune, and works
with any aftermarket 46 or 48 mm carburetor!
The Dominator Intake Manifold Kit comes
complete with all necessary bolt-on hardware
and R&D Power Plenum Filter
(M-16 reed valves sold separately), and has
jetting specifications for all 46 & 48 mm
aftermarket carburetors. The Dominator
Intake Manifold System is designed to be
used exclusively with the R&D M-16 Reed
Valve System. R&D offers optional accessory
linkage systems, throttle drums, splash
reflector trays, and throttle shaft
butterfly saver locks!
Pt. # 231-00800 Dominator M-16 Sidedraft Intake
Manifold Kit
Pt. # 261-30750 Dominator M-16 Reed Valve
Kit
Pt. # 290-80000 Dominator M-16 Linkage Kit
Pt. # 371-80001 Dominator Mikuni
Multi-position Throttle Drum
Pt. # 371-80000 Dominator Splash Reflector
Tray Kit
|
|
|
|
 |
SXR
800 Exhaust Power Sleeve - Now
Available
The new R&D billet aluminum Exhaust Power
Sleeve is designed to insert into the
stinger of the stock exhaust to reduce the
singer size thereby increasing back
pressure. This is a simple installation that
will increase top speed and add 100 RPM.
Pt. # 331-80000
|
|
|
|
 |
SXR
800 Rear Sponson - Now
Available
The new R&D SXR 800 rear Sponson kit affix
beneath the bond flange at the rear of the
craft. This race proven design enhances
overall handling of the craft allowing you
to charge harder through rough water
conditions with new found confidence.
Pt. # 121-00800
|
|
|
|
 |
SXR
800 Rule Bridge Mount Bracket - Now
Available
The R&D Rule Bildge Pump Mount Bracket bolts
securely to the hull developing a secure
surface to hold the bildge pump in place.
Pt. # 660-80000
|
|
|
|
 |
R&D/Solas SXR
800 Impeller -
Now Available
R&D/Solas Concord
Impeller will reduce cavitation, and
add to top speed performance.
Pt. # 131-01322 - Recreational Prop - Solas
13/22 Dynafly
Pt. # 131-01423 - Limited Prop - Solas 14/23
Dynafly
|
|
|
|
 |
SXR 800
Rapid Ratio Steering Plate -
Now Available
The R&D SXR 800 Rapid Ratio Steering
Plate was designed to increase
steering nozzle turning ratio with
three adjustable steering cable ball
pivot positions (Stock, plus 8 mm,
and plus 16 mm). The R&D Steering
Plate also has a redesigned stop
system, which will allow the
steering plate to be relocated 1”
Forward. NOTE: Must use the R&D
steering sub-plate shaft Pt. # 521-80020
Pt. #
521-80010
|
|
|
|
 |
SXR 800
Steering Subplate Shaft -
Now Available
The new R&D stainless steel subplate
shaft is designed to mount into the forward
hole location on the stock subplate. This
modification simulates a 1” shorter handle
pole design. Moving the rider bar position
forward 1” transfers weight to the front of
the craft, reducing nose hop and improves
cornering and straight line stability. (Must
be used with R&D Steering Plate Pt. #
521-80010)
Pt. #
521-80020
|
|
|
|
 |
SXR
800 Reed Valve Spacer Kit -
Now Available
The R&D Reed Valve Spacer Kit will
relocate the reed valves to a longer
intake track and add to crankcase
volume! The combination of a longer
intake track and added crankcase
volume will add a significant boost
in Low-end acceleration! The R&D
Reed Valve Spacer Kit works
especially well with the Factory
Pipe exhaust kit!
Pt. # 251-75010
Pt. # 251-80000 Angled Type Design
|
|
|
|
 |
SXR
800 Adjustable Handle Pole Spring Tensioner
Kit - Now Available
Thank you for considering R & D Performance
Products for your high performance needs!
The R & D adjustable handle pole spring
preloader is another industry first! The R &
D adjustable spring preloader was designed
to work with any after market handle pole
design or weight. The adjustability in
spring tension to have a lighter or heavier
handle pole weight is something that top
pros desire to change, and have been
changing pending conditions! For example,
for many years, multi-time National and
World Champion Jeff Jacobs would run heavier
spring tension (lighter handle pole) in flat
water or slalom conditions and run lighter
spring tension (heavier handle pole) in surf
conditions. The R & D adjustable spring
tensioner allows you to adjust and tune to
find the best tension for you!
Pt. # 521-80000
|
|
|
|
 |
SXR
750/800 Stand Up Pump Shoe Seal Kit -
Now Available
New for the Kawasaki 750/800 stand-ups is
our exclusive R&D Pump Shoe Sealing Kit. The
new kit comes complete with individually
molded cavity plugs that are designed to
fill the large cavity air pockets in the OEM
pump shoe. By plugging these cavities
completely and resealing the shoe to the
pump with silicone sealer the pump cavity
will be 100% free of any possible air
pockets or leaks that promote cavitation.
Pt. # 161-80000
|
|
|
|
 |
SXR
800 Timing Kit - Now Available
The R&D SXR 800 timing kit produces a
substantial performance gain with the OEM
ignition system. By relocating the pickup
trigger on the ignition cover a full six
degrees of ignition timing is available.
Initial ignition timing from 0-2000rpm
boosted from 14 degrees to 20 degrees, mid
3000-5000rpm from 20 to 26 degrees and
overall 6500rpm + from 12 to 18 degrees.
Easy installation.
Pt. # 441-75001
|
|
|
|
 |
SXR
800 Inline Intake Manifold - Now
Available
The new SXR 800 Mikuni Super BN 46mm Intake
Manifold/Carb Plate is built with 120mm carb centers
(exact engine centers) and designed to match
the OEM Reed Valve with R&D Stuffers (Pt. #
271-75000). Made from cast aluminum this
manifold makes it easy to mount larger carbs
that the 800 powerplant responds well to.
Pt. # 231-75146
Pt. # 231-75148 matches V-Force Reed
|
|
|
|
 |
SXR
800 Reed Stuffers - Now Available
The R&D Reed Stuffers for the Kawasaki stand
up have been relied on over the past decade
to deliver stronger power. This stuffer is
designed to drop into the OEM reed valve and
create a blue printed match between the OEM
manifold and reed valve. Stuffing up the
reed eliminates air turbulence, creating
maximum airflow, improved velocity to the
intake ports, and allows the engine to pull
more fuel through bottom and mid range rpm.
Producing crisp throttle response and
increased bottom and mid power.
Pt. # 271-75000
|
|
|
|
 |
SXR
800 Engine Shims - Now Available
Engine Shims are essential for precise
engine alignment. R&D Engine Shims have a
tab that provides easy insertion and
removal. Shims are made of stainless steel
and have etched numbers to identify
thickness. Shims available in thickness of
.005", .010", .015", .020", .025", .030",
.050".
|
|
|
|
 |
SXR
800 Pro Series Head - Now Available
Pro Series SXR 800 Kawasaki heads are cast
aluminum with an internal gusseting design
that adds strength so the head will not lift
under compression. Sure Seal O ring
combustion chambers and silicon sealed water
jacketing eliminates blown head gaskets. The
cast design incorporates cylinder girdle
mounts along with enlarged water jacketing
for cooling down those high horse power
motors. Available in 23 thru 29cc ranges.
Pt. # Specifiy cc Volume
|
|
|
|
 |
SXR
800 Ride Plate - Now Available
The new R&D SXR 800 Ride Plate features a
redesigned bottom for improved straight line
stability and superior cornering. The cast
aluminum design offers a negative plain
angle that lightens the nose for up to 1 mph
speed gain. Endorsed by all team R&D
Kawasaki riders.
Pt. # 121-80000
|
|
|
|
 |
SXR
800 Power Plenum Filter - Now Available
The R&D Power Plenum for the Kawasaki SXR
800 is the filter of choice. Dyno tested and
championship proven Power Plenum Filters
generating the maximum airflow and volume,
period. Which means more horsepower,
increased throttle response, acceleration
and top speed. The exclusive lightweight R&D
design incorporates velocity stacks and is
engineered to improve air speed. The unique
Pro-Lock base allows for quick removal, for
those spontaneous carb adjustments. They are
maintenance free, all you have to do is bolt
them on and go. Immediate championship
performance for your Kawasaki.
Pt. # 200-00800 Stock carb application
Pt. # 200-00120 Aftermarket carb application
|
|
|
|
 |
SXR
800 Aquavein - Now Available
The new R&D Kawasaki SXR 800 Aquavein is
available. Tested and developed with
Kawasaki Racing to Offer maximum hook-up
through its dual wing design. The patented
wing design and extra deep channel rails
eliminate cavitation and allow for quicker
acceleration with improved speed and
handling. R&D Aquaveins are the # 1 selling
intake grate in the world and have won the
Watercraft Readers Choice Award every year
since its inception.
The R&D SXR 800 Aquavein is designed to be
used with the R&D SXR 800 Ride Plate pt. #
121-80000. The rear of the Aquavein is 1/4"
longer than the stock scoop grate. This is
to add strength to the rear mounting
surface. If you are using any other ride
plate you will need to cut the front tongue
of the ride plate off approximately 1/4" so
the ride plate will bump up to the rear of
the R&D Aquavein and install to its OEM bolt
hole location.
Pt. # 111-80000
|
|
|
|
 |
SXR
800 Monster M-16 Reed Valve - Now
Available
The Monster is everything you've ever wanted
in a Reed Valve. This valve is the door to
power, open the door and unleash the Monster
in your engine. New from R&D with over a
decade of development the low lift, high
flow sixteen port Monster M-16 power valve
advances reed technology into the 21st
century. Improving bottom end punch,
midrange pull and overall performance.
Available for Yamaha, Kawasaki & Sea-Doo
watercraft.
- Instant Throttle Response
- Up to 20% Gain in Horsepower
- Increased Acceleration
- Unsurpassed Performance and
Reliability
- 100% Aluminum Construction
- 30 Day Money Back Guarantee
Pt. # 261-20750 Reed and Manifold Kit
|
|
|
|
 |
SXR
800 Pet 2100DX Tachometer - Now
Available
The PET 2100DX Tach is water resistant and
will monitor two-stroke single, twins and
triple cylinders to 10,000 rpm within 10rpm
accuracy. Functions including: peak rpm
memory, hour meter, rpm recall and constant
rpm display.
Pt. # 802-12103
|
|
|
|
